Laminated coating installation process

The installation process of the laminated coating consists of the following stages:

Laying the substrate. This stage is carried out after leveling the floor surface. To do this, the sheets of the substrates are settled in the same way, and after that the ends glue among themselves with moral tape.

Next, the laminate laying stage occurs. To do this, you need to start the work with the corner of the room. When creating the first row, you need to be as attentive as possible, since it will affect the leveling of the rest.

To increase the strength of the fastening, as well as to give the surface a greater effectiveness of the panel, the panel is laid in a run. To do this, it is enough to remove each subsequent row to a certain distance in relation to the previous.

The laid row in relation to the previous one is knocked out using a hammer to ensure a reliable connection.

After the flooring of the flooring, it must be pressed with stops and wedges to one of the walls.

In conclusion, it is worth recalling that when working you need to follow the old proverb: “Measure seven times, cut off once”. Therefore, to do the work, you need to have a long time to appoint a free day and start work in the morning for the successful completion of work during the day.